Audio To
DVD-Audio (commonly abbreviated as DVD-A ) is a digital format for delivering high-fidelity audio content on a DVD. DVD-Audio is not intended to be a video delivery format and is not the same as video DVDs containing concert films or music videos. The first discs entered the marketplace in 2000. DVD-Audio was in a format war with Super Audio CD (SACD), another format for delivering high-fidelity audio content. Neither has gained a strong position in the marketplace.
Audio specifications
DVD-Audio offers many possible configurations of audio channels, ranging from single-channel mono to 5.1-channel surround sound, at various sampling frequencies and sample rates. (The ".1" denotes a Low-frequency effects channel (LFE) for bass and/or special audio effects.)
Compared to the compact disc, the much higher capacity DVD format enables the inclusion of either:
- Considerably more music (with respect to total running time and quantity of songs) or
- Far higher audio quality, reflected by higher linear sampling rates and higher bit-per-sample resolution, and/or
- Additional channels for spatial sound reproduction.
Audio on a DVD-Audio disc can be stored in many different bit depth/sampling rate/channel combinations:
Different bit depth/sampling rate/channel combinations can be used on a single disc. For instance, a DVD-Audio disc may contain a 96 kHz/24-bit 5.1-channel audio track as well as a 192 kHz/24-bit stereo audio track. Also, the channels of a track can be split into two groups stored at different resolutions. For example, the front speakers could be 96/24, while the surrounds are 48/20.
Audio is stored on the disc in Linear PCM format, which is either uncompressed or losslessly compressed with Meridian Lossless Packing. The maximum permissible total bit rate is 9.6 Megabits per second. Channel/resolution combinations that would exceed this need to be compressed. In uncompressed modes, it is possible to get up to 96/16 or 48/24 in 5.1, and 192/24 in stereo. To store 5.1 tracks in 88.2/20, 88.2/24, 96/20 or 96/24 MLP encoding is mandatory.
The LFE channel is actually full range, and can be recorded at the same resolution as the other channels. This permits it to be used instead as an extra main channel, for example as a "height" speaker above the listening position; this has been done on some releases. Such usage is non-standard, and will often require special set-up by the end-user.
If no native stereo audio exists on the disc, the DVD-Audio player may be able to downmix the 5.1-channel audio to two-channel stereo audio if the listener does not have a surround sound setup (provided that the coefficients were set in the stream at authoring). Downmixing can only be done to two-channel stereo, not to other configurations, such as 4.0 quad. DVD-Audio may also feature menus, text subtitles, still images and video, plus in high end authoring systems it is also possible to link directly into a Video_TS folder that might contain video tracks, as well as PCM stereo and other "bonus" features.
Player compatibility
With the introduction of the DVD-Audio format, some kind of backward compatibility with existing DVD-Video players was desired, although not required. To address this, most DVD-Audio discs also contain DVD-Video compatible data that allows the standard DVD-Video Dolby Digital 5.1-channel audio track on the disc (which can be downmixed to two channels for listeners with no surround sound setup). Some discs also include a native Dolby Digital 2.0 stereo, and even a DTS 96/24 5.1-channel, audio track.
Since the DVD-Audio format is a member of the DVD family, a single disc can have multiple layers, and even two sides that contain audio and video material. A common configuration is a single-sided DVD with content in both the DVD-Video (VIDEO_TS) and DVD-Audio (AUDIO_TS) directories. The high-resolution, Packed PCM audio encoded using MLP is only playable by DVD players containing DVD-Audio decoding capability. DVD-Video content, which can include LPCM, Dolby or DTS material, and even video, makes the disc compatible with all DVD players. Other disc configurations may consist of double layer DVDs (DVD-9) or two-sided discs (DVD-10, DVD-14 or DVD-18). Some labels have released two-sided DVD titles that contain DVD-Audio content on one side and DVD-Video content on the other, the Classic Records HDAD being one such example.
Preamplifier/Surround Processor interface
In order to play DVD-Audio, a preamplifier or surround controller with six analog inputs was originally required. Whereas DVD-Video audio formats such as Dolby Digital and DTS can be sent via the player's digital output to a receiver for conversion to analog form and distribution to speakers, DVD-Audio is not allowed to be delivered via unencrypted digital audio link at sample rates higher than 48 kHz (i.e., ordinary DVD-Video quality) due to concerns about digital copying.
However encrypted digital formats have now been approved by the DVD Forum, the first of which was Meridian Audio's MHR (Meridian High Resolution). The High Definition Multimedia Interface (HDMI 1.1) also allows encrypted digital audio to be carried up to DVD-Audio specification (6 × 24-bit/96 kHz channels or 2 × 24-bit/192 kHz channels). The six channels of audio information can thus be sent to the amplifier by several different methods:
- The 6 audio channels can be decrypted and extracted in the player and sent to the amplifier along 6 standard analog cables.
- The 6 audio channels can be decrypted and then re-encrypted into an HDMI or IEEE-1394 (Firewire) signal and sent to the amplifier, which will then decrypt the digital signal and then extract the 6 channels of audio. HDMI and IEEE-1394 encryption are different from the DVD-A encryption and were designed as a general standard for a high quality digital interface. The amplifier has to be equipped with a valid decryption key or it won't play the disk.
-
The third option is via the S/PDIF (or TOSLINK) digital interface. However, because of concerns over unauthorized copying, DVD-A players are required to handle this digital interface in one of the following ways:
- Turn such an interface off completely. This option is preferred by the music publishers.
- Downconvert the audio to a 2-channel 16-bit/48 kHz PCM signal. The music publishers are not enthusiastic about this because it permits the production of a CD-quality copy, something they still expect to sell, besides DVD-A.
- Downconvert the audio to 2 channels, but keeping the original sample size and bit rate if the producer sets a flag on the DVD-A disc telling the player to do so.
- A final option is to modify the player, capturing the high resolution digital signals before they are fed to internal D/A converters and convert it to S/PDIF, giving full range digital (but only stereo) sound. There exist already do-it-yourself solutions for some players. There also exists an option to equip a DVD-A player with multiple S/PDIF outputs, for full resolution multichannel digital output. See: Six channel S/P-DIF output board.
Sound quality
From a purely technical standpoint, the audio resolution of a DVD-Audio disc can be substantially higher than standard red book CD audio. DVD-Audio supports bit depths up to 24-bit and sample rates up to 192 kHz, while CD audio is 16-bit, 44.1 kHz. In both cases, the source recording may have been made at a much higher bit and sample rate, and down-converted for commercial release.
Many DVD-Audio releases are older, standard definition audio recordings that have been remixed in 5.1 and upsampled to DVD-Audio's higher resolution. However, the fidelity of the upsampled audio will be limited by the source material quality and may not exceed the quality of existing CD releases of the same albums. Recordings that are made using high-resolution PCM encoding can be released with a resolution that is higher than standard CD.
There is controversy regarding the audible fidelity improvement when listening to a stereo DVD-Audio disc compared to a CD-disc, even when conditions and content are optimal. In a peer-reviewed blind listening test published in the Journal of the Audio Engineering Society, the authors were unable to find any proof that stereo DVD-Audio as a format sounds different from CD. The author suggests that differences in the mastering for particular DVD-Audio and CD may explain perceived differences.
Three of the major music labels, Universal Music, EMI and Warner Bros. Records and several smaller audiophile labels (such as AIX Records and DTS Entertainment) have released or are continuing to release albums on DVD-Audio, but the number is minimal compared to standard CDs. New high-definition titles have been released in standard DVD-Video format (which can contain 2-channel Linear PCM audio data ranging from 48 kHz/16-bit to 96 kHz/24-bit), "HDAD", which includes a DVD-Video format recording on one side and DVD-Audio on the other, CD/DVD packages, which can include the album on both CD and DVD-Audio, or DualDisc, which can contain DVD-Audio content on the DVD side. In addition, some titles that were initially released as a standalone DVD-Audio disc, such as The Grateful Dead's American Beauty and R.E.M.'s Automatic for the People , were re-released as a CD/DVD package or as a DualDisc.
Copy protection
DVD-Audio discs may optionally employ a copy protection mechanism called Content Protection for Prerecorded Media (CPPM). CPPM, managed by
MP3 to MIDI and WAVE to MIDI Converter: WIDISOFT Features
WIDI Audio To MIDI VST Plug-in performs music recognition within Cubase or other VST hosts.
AudioToMIDI, wav2mid -*- TallStick -*- wave to mid ...
TallStick Software company develops software for sound and music processing. Visit our Products section for more information. Our products are:
Add audio to your websites with our streaming audio software
Add audio to your websites with our streaming audio software Please turn your computer speakers on!
How to Add Audio / Music to Video Files - Insert Audio / Music into ...
All-in-one software features audio and video editing with the ability to add audio to video files.
Free Audio to Flash Converter: add Flash MP3 audio ...
Convert MP3 to SWF and add Flash MP3 audio player to your website or blog with Free Audio to Flash Converter. It's easy!
Audio to video synchronization - Wikipedia, the free ...
[edit] Incorrectly synchronized. There are different ways in which the AV-sync can get incorrectly synchronized: During creation AV-sync errors happen because of
Audio to text|Convert Audio to Text|Audio to text ...
Audio-to-Text online service for multimedia professionals, call toll free number 1-877-323-4707 for quality transcripts at affordable prices.
Adding audio to your website doesn't have to be ...
Adding Audio To Your Website is a complete step-by-step guide on recording your message, uploading it to your website, and customizing the audio player graphic.
AUDIO TO MUTE on MySpace Music - Free Streaming MP3s ...
MySpace Music profile for AUDIO TO MUTE. Download AUDIO TO MUTE Indie / Rock / Alternative music singles, watch music videos, listen to free streaming mp3s, & read AUDIO TO MUTE's ...
Audi to Build e-Tron Electric Supercar - Wheels Blog - NYTimes.com
Audi has confirmed that it will build the electric e-tron supercar that made its debut in concept form last month at the Frankfurt auto show.